Peel and Stick Wood Slat Wall Panels

The Little Jax Slat Wall Roll

The Designer Slat Wall, Without the Carpenter

A wood slat accent wall is one of the easiest ways to make a room look expensive. Normally it means cutting and fixing dozens of wooden battens.

This comes as one self-adhesive roll, 15.7 inches wide and 118 inches long, so the slats run in one continuous line from floor to ceiling. Peel off the backing, line it up and press it on.

Check this first

How Much Do I Need?

Each roll is 15.7 inches wide and 118 inches (9.8 ft) long, so you work out how many you need from the width of the wall. Measure the wall from side to side in inches and divide by 15.7, then round up.

Each roll covers a strip up to 9.8 ft tall, enough for floor to ceiling on a standard 8 or 9 ft wall. Trim the excess at the bottom with a utility knife.

Area

Size

You need

4 ft wide wall

48 in wide, up to 9.8 ft tall

4 rolls

6 ft wide wall

72 in wide, up to 9.8 ft tall

5 rolls

8 ft wide wall

96 in wide, up to 9.8