
PETG Filament 1.75mm with RFID for Bambu Printers P1,X1,A1 Series,Tough,High ,Outdoor Use PETG Refill 1KG (2.2lbs) Spoolless, +/- 0.03mm(Black 30105)
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a 1 kg spoolless refill of black PETG filament in 1.75 mm diameter, made for Bambu Lab P1, X1 and A1 series printers. An RFID tag lets the AMS read the material and load its print settings automatically, so you skip manual profile setup. PETG sits between PLA and ABS: tougher and more heat- and weather-resistant than PLA, easier to print than ABS. The tight ±0.03 mm diameter tolerance and reduced stringing suit structural parts, household items and outdoor pieces. It is a refill, so you need a reusable spool to mount it.
In stockSold by erafasaReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a 1.75 mm PETG filament refill for Bambu printers in the P1, X1 and A1 series. It combines the rigidity of PLA with added toughness, so it can absorb force and handle greater loads. It suits structural parts, household items and practical everyday tools.
The filament is made to a 1.75 mm diameter under quality control for smooth feeding and consistent printing. It is less sensitive than typical PETG filaments, which reduces stringing and gives crisper details and a cleaner finish.
Printing parameters are stored in an RFID tag on the filament. The AMS (Automatic Material System) reads the tag, so you load the filament and print without manual setup. The refill comes spoolless.











