
Phaetus DXC Extruder for Creality K1 Series / DIY 3D Printers
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Phaetus DXC is an aftermarket extruder for Creality K1, K1C and K1 Max printers, built with Omranello of D3vil Designs and co-branded with Creality. It replaces the stock unit and reuses your existing stepper motor, so you keep the motor and swap the filament path. It also fits DIY toolheads through community mounts such as Voron Stealthburner, Mini Sherpa and Orbiter 2 patterns. Compared with the stock K1 extruder, it is a lighter, more serviceable design aimed at owners chasing better grip and easier maintenance; it is not a drop-in for every printer and needs a top cover raiser on K1 machines.
In stockShips from Australia · priced in AUD (A$97.30) · duties may applyReturn policy
The Phaetus DXC Extruder is an extruder for Creality K1 series 3D printers, including the K1, K1C and K1 Max. It can also be used on DIY 3D printers with a printed adapter, depending on the toolhead. It is manufactured by Runice and co-branded with Creality as a collaboration between Phaetus and Omranello from D3vil Designs.
On K1 series printers, a top cover raiser is required or the top cover must be removed. The extruder is not compatible with the K1 Upgrade to CFS Upgrade because it has no cutter, unless a custom carriage with cutter support is printed. For DIY use, a community mount is required, and the motor connection may need re-crimping or splicing to suit the toolhead board or to extend back to the extruder stepper driver.
The stepper motor is not included; the stock stepper motor is reused. Included are the DXC Extruder, an extension cable, an H2 hex key and an M3*4 button head screw. After installation, recalibrate the E-steps and check the pressure advance and retraction settings. For flexible filament, start at lower speed with moderate retraction, use a consistent filament path and check idler tension; check gear alignment regularly and keep the drive path clean.