
Phanteks XT Pro ATX PC Case
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Phanteks XT Pro is a mid-tower ATX case built around hidden-connector motherboards from MSI and ASUS, with passthroughs that route almost every cable into the rear compartment. It takes graphics cards up to 415mm long and 184mm wide, fits large tower coolers, and has room for up to three radiators plus multiple storage drives and fans. That puts it ahead of many budget mid-towers on GPU clearance and cable management, though it is a plain steel-and-mesh box rather than a premium one. It suits builders chasing a clean, cable-free look and heavy cooling on a mainstream budget.
In stockShips from the UK · duties may applyReturn policy
The Phanteks XT Pro is a mid tower PC case with a tempered glass side panel. It is compatible with hidden-connector motherboards, including MSI Project Zero and ASUS BTF models, which place connectors such as the 24-pin on the back of the board. Passthroughs from the main chamber to the rear compartment give access to those connectors so cables can be routed behind the motherboard tray. Components that do not draw their power from the motherboard, such as high-end GPUs and AIO pumps, still route their wires through the main chamber.
The motherboard tray fits ATX, Micro-ATX, Mini-ITX and E-ATX boards under 280mm wide. The main chamber clears graphics cards up to 415mm long and 184mm wide, and CPU air coolers up to 184mm tall. The bottom compartment holds a power supply up to 270mm long alongside a drive cage for up to two 3.5" HDDs, and a removable bracket behind the motherboard tray carries up to three 2.5" SSDs.
Three radiator locations can be used at the same time: a 360mm radiator at the top, a 240mm radiator at the front and a 120mm radiator at the rear. The case has mounting points for up to ten fans: three 120mm at the top, three at the front, one at the rear and three on the PSU shroud, which draw air from the bottom chamber toward the GPU. The 140mm mounts are two at the top, three at the front and one at the rear. The front panel has USB Type-A and USB Type-C ports.