
Pinpoint 12 in. Powermatic 1791308 Model 1285 3HP, 3-Phase 230 & 460V Helical Head Jointer
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Powermatic 1285 is a 12-inch industrial jointer built around a helical cutterhead with two-sided carbide inserts, so knife changes are quick and the cut stays consistent without resetting knives. Its parallelogram table design keeps the tables close to the cutterhead and holds them parallel over years of use, and the cast iron fence adjusts by rack and pinion with preset stops at 90° and 45° in and out. The 3 hp three-phase motor and 12-inch width suit a shop running 230 or 460 V three-phase power and jointing wide boards and large rabbets. Against 8-inch jointers it offers far more capacity and a helical head that most rivals sell as an upgrade, but it needs three-phase power and an 800 cfm dust collector.
In stockSold by UnbeatableSale LocalReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The Pinpoint 12 in. jointer is a floor-standing machine built around a 3 hp, 3-phase motor and a helical cutterhead. Its tables measure 84 x 12 in and stand 31-5/8 in from the floor, and cutting capacity is 11-3/4 in wide by 3/4 in deep. The motor is prewired for 230 V and can run on 230 or 460 V.
The helical cutterhead holds 42 two-sided carbide inserts, spins at 5,000 rpm and makes 15,000 cuts per minute; knife changes are fast and need no adjustment. The parallelogram design keeps the tables close to the cutterhead for an improved finish and quick depth-of-cut adjustment, and keeps them parallel over time. Table lips on both sides of the cutterhead aid in noise reduction.
The cast iron fence measures 47-1/4 x 5-1/4 in and moves by rack and pinion with a ram lock for positioning without play. Preset stops set the fence at 45° in and out, with a positive stop at 90°. A full-size rabbeting ledge supports large workpieces for rabbets up to 3/4 in deep, and a cutterhead guard is included. The dust port is 4 in outside diameter at the front and requires at least 800 cfm.
It checks today's price at every store, compares the alternatives and answers in about a minute.