
PLA Matte
Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
Elegoo PLA Matte is a 1.75 mm PLA filament with a matte, low-saturation finish that softens layer lines and gives prints a pastel, macaron look. It is wound on a cardboard spool and held to a stated diameter tolerance of +/- 0.02 mm, and Elegoo says it strings and deforms less than standard PLA. It suits hobbyists and makers printing decorative pieces, figurines and display models on common FDM printers who want a clean surface without sanding or painting. Against glossy PLA it trades some surface sheen and layer-line sharpness for a flatter, more uniform look; matte filaments generally need slightly more careful cooling and retraction tuning than standard PLA.
In stockReturn policy
Owners of Elegoo matte PLA generally report clean, consistent extrusion and a flat surface that hides layer lines well. Some note the filament is more brittle than standard PLA and can snap if left under tension, and a few mention needing to adjust retraction settings.
Elegoo PLA Matte is a 1.75 mm PLA filament for FDM 3D printers. It has a matte surface in low-saturation, pastel "macaron" colors. The matte finish helps hide visible layer lines.
The filament is less prone to stringing and deformation than standard PLA. This means cleaner prints and less post-processing. Dimensional accuracy is +/- 0.02 mm.
Each cardboard spool is neatly wound and manually inspected to prevent tangles and crossed turns. The filament is fully dried and vacuum-sealed with desiccants to keep out dust and moisture. This reduces clogging and bubbles during printing.







