

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The ZzCityTK is a pneumatic brake fluid bleeder that runs off a shop compressor at 90-120 psi and draws fluid out under vacuum, so one person can bleed and refill a brake system without a helper pumping the pedal. It comes with a 1 L extraction container, a 0.75 L refill container, a 2 m hose and four tapered cylinder reservoir adapters covering roughly 21-41 mm filler necks. That puts it in the same class as other air-powered bleeders, but with a smaller adapter set than kits that include a master-cylinder cap for European cars. It suits DIYers with a compressor who work on common Asian and domestic cars; anyone without air, or with a car that needs a screw-on cap adapter, should look elsewhere.
In stockSold by UsKwareReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a pneumatic brake fluid bleeder kit that runs off an air compressor to bleed brakes and replace brake fluid. It has a 1 L oil extraction container and a 0.75 L refill container. Four plastic adapters are included for fitting different cylinder reservoir openings.
The tool runs on an air supply of 90 to 120, 6 to 12 bar, through a 1/4"-18 inlet, and uses 180 L/min of air. It generates 60% negative pressure to draw old fluid out of the system. A 2 m hose connects the unit to the brake bleeder screw.
To use it, take the old brake fluid out of the tank and refill it with fresh fluid. Start the car, connect the hose between the tool and the brake bleeder screw, and loosen the screw without taking it out completely. Open the valve to start siphoning and close it when the fluid stops. A tapered spout in the kit helps prevent leaks, and the tool should be held above the brake pump.
