
Pneumatic Sandblasting Gun for Air Compressors, 500ml Abrasive Blaster
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is an air-powered abrasive blaster that attaches to a compatible air compressor; it is not a self-contained electric unit. Its 500ml tank and small nozzle suit localized work: rust removal on small metal parts, rough-edge finishing, glass and mirror etching, slate etching, and cleaning cement or ceramic tile. It needs a compressor that delivers about 6 CFM at 90 PSI, which rules out most small pancake compressors. Against gravity-feed blasters with larger hoppers, it trades capacity for control in corners and detail areas.
In stockReturn policy
This is a pneumatic abrasive sandblasting gun that runs on an external air compressor rather than its own power source. A 500ml tank holds the abrasive media, and the small-nozzle design is aimed at detail work on small metal parts, edges and corners.
Maximum pressure is 90 PSI, with air consumption listed at 6 CFM at 90 PSI. The listing specifies a 10G compressor or larger, and the compressor must also be able to supply the required airflow at pressure.
Listed applications include rust removal, polishing, rough-edge and small-corner finishing, glass, mirror and slate etching, and cleaning dirty cement and ceramic tiles. Results depend on the abrasive, pressure, surface condition and technique, so the guidance is to test a small area before treating the full surface. The tool requires suitable eye, face and respiratory protection and appropriate dust control.
It checks today's price at every store, compares the alternatives and answers in about a minute.