- Will these fit a standard 4-Tec 2.0?
- They are made for the 4-Tec Drift. The Drift shares much of its rear geometry with the 4-Tec 2.0, but check the hub mounting on your chassis before buying.
- Do they come as a pair?
- Yes, rear hub carriers are sold as a left and right pair. Bearings and screws are not included, so reuse your stock hardware.
- Are they stronger than the stock plastic hubs?
- Yes, aluminum resists the cracking and flex that plastic hubs show after repeated curb hits. The trade-off is that a hard impact can bend the aluminum or pass the force into the arm instead.
- Do I need to reset rear toe after fitting them?
- Yes. Set rear toe with a gauge or setup station after installation, since the new hubs change the arm position slightly.
- Can I use them on the front?
- No. These are rear steering hub carriers. Front caster and steering blocks are a different part.
- What is in the box?
- Two red anodized aluminum rear hub carriers. No bearings, pins or screws.
- Where is the Powerhobby Aluminum Rear Steering Hub Carriers Red FOR Traxxas 4-Tec Drift cheapest?
- At WREKD, for $14.99, as of our latest check.
- Where can I buy the Powerhobby Aluminum Rear Steering Hub Carriers Red FOR Traxxas 4-Tec Drift?
- 4 stores we checked sell it, including WREKD, Power Hobby, eBay, Island Hobby Nut.