This intake manifold is made for stock-port Predator 212 Non-Hemi cylinder heads. It is designed around airflow and port alignment, giving a smooth transition from the intake and gasket into the port. It is precision 3D printed in aluminum.
The flange is port-matched to the stock-port Predator 212 Non-Hemi intake port. The included port-matched .031" Garlock BLUE-GARD® gasket removes the gasket overhang found on many replacement gaskets. The runner is angled upward and back to follow the factory intake port angle, which gives a straighter path into the head. Inside, it tapers gradually from the carburetor flange to the cylinder head instead of tapering abruptly near the port.
Runner length is designed around a target horsepower peak at 9,000 RPM using the 3rd intake tuning harmonic. The 4th harmonic occurs near 6,800 RPM. The 3rd harmonic is commonly chosen for a balance of peak torque and peak horsepower. The 4th typically gives a broader operating range with a slight tradeoff in peak torque. A built-in 1/8" NPT pulse port supports vacuum-operated pulse fuel pumps.
- Fits
- Predator 212 Non-Hemi with stock-port cylinder heads
- Material
- 3D printed aluminum
- Gasket
- .031" Garlock BLUE-GARD®, port-matched
- Pulse port
- Built-in 1/8" NPT
- Tuning
- 3rd harmonic targets a 9,000 RPM horsepower peak; 4th harmonic near 6,800 RPM
- In the box
- Aluminum intake manifold, port-matched Garlock BLUE-GARD® gasket, stainless steel mounting bolts, pipe plug for the pulse port
- Maker
- That Nick Stuff