
Price facts
- Lowest price today: $38.00 at Monocure3D (checked Nov 20, 2026).

Proto Rapid Resin is a prototyping photopolymer for MSLA printers with monochrome LCD screens. It cures in 2 to 3 seconds per layer on most such printers, which keeps print times short, and it needs only a quick shake before pouring. The maker recommends a 30 to 60 minute post-cure after cleaning to build strength and dimensional stability and to lower the risk of cracking over time. It suits hobbyists and small shops printing detailed, durable prototypes rather than display models or flexible parts.
In stockShips from Australia · duties may applyReturn policy
Rated 4.9 out of 5 from 18 ratings, buyers are largely positive.
Proto Rapid Resin is a prototyping resin for MSLA 3D printers with monochrome LCD technology. It is made for highly detailed parts with a durable surface finish and for prototypes that require accuracy, strength, and consistency.
Shake or mix the resin thoroughly before use. On most monochrome LCD printers, layer cure times are 2 to 3 seconds. Confirm the recommended settings for your printer and complete a small calibration print before starting a large job.
After printing, clean the parts and post-cure them for 30 to 60 minutes. This helps maximize strength and dimensional stability while reducing the risk of cracking over time. Work in a well-ventilated area with suitable gloves and eye protection, and store the container tightly closed, upright, and away from direct sunlight.
It checks today's price at every store, compares the alternatives and answers in about a minute.