
Puaida 10S/12S 4WD Hub Motor ESC Remote Kit for DIY Electric Skateboard
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a DIY electronics kit: a sine-wave electronic speed controller plus a display remote for building or upgrading a dual-hub-motor electric skateboard. Puaida rates it for 36V 10S packs (30V–42V) with 48A total rated current and asks for a battery that can discharge 60A continuously. Paired with Puaida's 90 mm dual hub motors it reaches about 30 mph in the top speed modes. It suits builders who already have motors, a battery and a deck and want a matched controller and remote rather than a complete board.
In stockShips from China · duties may applyReturn policy
The Puaida ESC Remote Kit is a speed controller and remote for DIY electric skateboards. The ESC uses a sine wave scheme and is rated for 36 V, 10S systems (30 V–42 V). It has a rated current of 12 × 4 = 48 A and requires a battery with a maximum continuous discharge of at least 60 A.
The remote has a display for current speed, speed mode, brake mode, and the battery level of the remote and skateboard. It has 4 speed modes and 4 brake modes. A power button and a function button control reverse, lights, cruise control, and the speed and brake modes.
The kit is compatible with 70–120 mm hub motors under 80 kV and is not compatible with belt drive motors. With Puaida 90 mm dual hub motors, it can reach up to 30 mph in speed modes 3 and 4. The ESC includes a low-voltage alarm, under-voltage protection, and power-failure protection.
It checks today's price at every store, compares the alternatives and answers in about a minute.