
QA1 COK113 2.205-8 TPI Coilover Conversion Kit 2.5in ITT Strut - Red Anodized Nut
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The QA1 COK113 is a hardware kit that lets you mount a 2.5-inch inner-diameter coil spring onto a QA1 Proma Star Series aluminum strut. It includes the cap, spring seat, red anodized adjuster nut, needle bearing washers and thrust bearings for one strut. Ride height is set by turning the threaded spring seat, and QA1 lists the T114W or T115W spanner wrench for that job. It suits builders converting Proma Star struts to coilover and anyone replacing worn conversion hardware; the catch is that one kit covers one strut, so a full car needs several.
In stockReturn policy
The COK113 is a coilover conversion kit that mounts a 2.5 inch I.D. coil spring onto QA1 Proma Star Series aluminum struts. Each kit carries the hardware for one individual strut.
The kit is built from aluminum and steel, and the adjuster nut and lock ring have a red anodized finish. Ride height is set at the spring seat, and a needle bearing washer sits in the assembly.
The kit fits QA1 Proma Star struts Hx01, Hx03, Hx05 and Hx06, and the thread size is 2.205-8 TPI. Spanner wrenches T114W or T115W are compatible and recommended for ride height adjustment.
It checks today's price at every store, compares the alternatives and answers in about a minute.








