Quikrete Concrete Mix is a pre-blended mix of portland cement, sand, and gravel or stone. It has an average compressive strength of 4000 psi. The mix is ready to use and needs only water.
It is made for general structural concrete work where the pour is 2 in. (51 mm) thick or more. Uses include foundation walls and footings, sidewalks, curbs, steps, ramps, walkways, floor slabs, and patios. It also suits pipe and post footings, appliance and equipment platforms, pools, fish pools, stepping stones, splashblocks, bird baths, riprap and slope protection, and driveway repairs.
The mix can be mixed in a barrel-type concrete mixer or a mortar mixer. Choose a mixer size that fits the job. Allow at least 1 cu ft (28 l) of mixer capacity for each 80 lb (36.3 kg) bag mixed at one time. Start the mixer and add the concrete. If the mix becomes too hard to mix, add more water until it is workable.
- Bag size
- 60 lb
- Composition
- Portland cement, sand, and gravel or stone
- Compressive strength
- 4000 psi average
- Preparation
- Just add water
- Minimum thickness
- 2 in. (51 mm) or more
- Mixer type
- Barrel-type concrete mixer or mortar mixer
- Mixer capacity
- At least 1 cu ft (28 l) per 80 lb (36.3 kg) bag
- Water per 80 lb bag
- About 6 pt (2.8 l) to start; final amount about 6–9 pt (2.8–4.3 l)
- Slump
- 2–3 in. (51–76 mm) if a slump cone is used