
Random Orbital Sander with Turbo Gear Drive - 150mm, 5.0mm Orbit
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Rutlands 150mm random orbital sander is a dual-mode tool: a free-rotation 5.0mm orbit for fine finishing and a gear-driven turbo mode that forces the orbit for aggressive stock removal without stalling. An 800W motor with electronic speed control holds 3,300–7,400 RPM under load, and the side slide switch locks on for continuous use. The 150mm hook-and-loop pad feeds a rear 25mm dust port for through-body extraction. It suits woodworkers and refinishers who want one tool for stripping paint and flattening rough stock as well as swirl-free final sanding, though it is heavier and bulkier than a single-mode finishing sander.
In stockShips from the UK · duties may applyReturn policy
This is a 150mm random orbital sander that works in two modes. In free rotation mode the pad runs in a standard 5.0mm random orbit, driven only by rotational momentum. In turbo gear drive mode, gears forcibly drive the orbit, so the sander keeps running under heavy pressure with no stalling.
An 800W high torque motor drives the sander at a variable speed of 3,300 to 7,400 RPM. An electronic speed controller holds the selected speed under load. The side mounted slide switch is set up to prevent accidental start-up and can be locked in the on position for continuous operation.
The 150mm hook and loop backing pad is shaped to maximise air flow for through-body dust extraction through the rear 25mm dust port. An auxiliary handle screws into the left or right side, and a clip-on edge protector shields the edge of the backing pad and adjacent surfaces when sanding up against corners and edges.