It checks today's price at every store, compares the alternatives and answers in about a minute.
The Raspberry Pi 5 Active Cooler is the official cooling kit for the Pi 5: a finned metal heatsink with a variable-speed blower fan that plugs into the board's dedicated fan connector. It mounts on the Pi 5's pair of heatsink holes with sprung pins and pre-attached thermal pads, and the fan stays off until the CPU gets hot, so it is silent at idle. It is the simplest way to stop a Pi 5 from throttling under sustained load, and it costs far less than third-party tower coolers while fitting inside most official and aftermarket cases. Owners rate it highly for quiet operation and easy setup; the main trade-offs are that it needs a case with room above the board and that it is not meant for use without one.
In stockReturn policy
Owners rate it very highly, praising the near-silent idle behavior, the simple push-fit installation and the drop in temperatures under load. Complaints are mostly about clearance in tight cases and fan noise once the Pi is pushed hard.
The Raspberry Pi 5 Active Cooler is a cooling unit for a Raspberry Pi 5 running under sustained heavy load without a case. It combines a large metal finned heatsink with a variable-speed blower fan. The fan connects to the board through the Raspberry Pi 5 fan connector.
The cooler attaches to the board with sprung pins that fit the dedicated pair of mounting holes on the Raspberry Pi 5. Pre-attached thermal pads create the thermal connection with the board and hold the cooler in place. Heat from the CPU spreads across the heatsink body and fins, and the fan pushes cool air over them.
The fan is software-controlled and temperature-controlled, so it can stay off and silent until cooling is needed. A Raspberry Pi board is not included.