It checks today's price at every store, compares the alternatives and answers in about a minute.
The Compute Module 5 IO Board is the official carrier board that turns a Compute Module 5 into a full-size Raspberry Pi 5-style development platform. It exposes the module's peripheral interfaces on standard connectors, with full-size HDMI instead of micro HDMI, and adds the Pi 5 power button. It is aimed at design engineers and industrial integrators prototyping products around the CM5, and it doubles as a reference design published in KiCad. Compared with third-party carrier boards, it offers the official pinout, documented schematics and the REV2 fan-control fix, but it is a development and evaluation board rather than a finished enclosure.
In stockShips from the UK · priced in GBP (£16.00) · duties may applyReturn policy
Owners rate it highly as the reference way to bring up a Compute Module 5, praising the standard connectors and documentation. Some note the added cost of module, case and cooling, and that the REV2 case differs from the original.
The Raspberry Pi Compute Module 5 IO Board provides a starting point for integrating Compute Module 5 into products and serves as an alternative Raspberry Pi form factor for industrial applications. It breaks out the module's peripheral interfaces to the standard connectors used by Raspberry Pi 5, with full-size HDMI in place of micro HDMI. The board accepts the complete range of Compute Module 5 parts and has a power button to wake and shut down the module.
The board provides a standard 40-pin GPIO header, Gigabit Ethernet RJ45 with PoE+ HAT+ support, two USB 3 sockets, an M.2 M key PCIe socket, a microSD card socket for Compute Module 5 Lite modules, and a 4-pin fan connector. It also has two MIPI DSI/CSI-2 FPC connectors for 22-pin 0.5 mm pitch cables, a Raspberry Pi HAT+ connector, a CR2032 battery socket for the RTC, and two full-size HDMI 2.0 connectors.
Power comes from an external +5V USB-C PSU, with a 27W PSU recommended. The REV2 version includes improved fan control and minor BOM improvements, with no mechanical change. It is available as a reference design in KiCad format, and an optional Compute Module 5 IO Case can house the board. The board is supplied on its own; Compute Module 5, the case and other accessories are not included.