
Raspberry Pi Compute Module 5 IO Case REV2
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A two-piece metal enclosure for the Raspberry Pi Compute Module 5 and the CM5 IO Board. The REV2 revision moves the fan so a heatsink can sit on the board without blocking it, and relocates the hot-air vents to push airflow through the case. It leaves room for an M.2 SSD or a PoE+ HAT+, and has slots for CSI-2 cameras and DSI displays plus a built-in controllable fan. It suits builders running a CM5 as a small server, media box or embedded project who want a finished, cooled housing rather than an open board.
In stockShips from the UK · priced in GBP (£12.00) · duties may applyReturn policy
The Raspberry Pi Compute Module 5 IO Case REV2 is a two-piece sheet-metal enclosure for a Raspberry Pi Compute Module 5 and the Compute Module 5 IO Board. It measures 170 mm x 94 mm x 28 mm and weighs approximately 350 g. The case is supplied on its own; the IO board, CM5, and cables are not included.
In the REV2 version, the fan position has moved so a heatsink can be fitted to the CM5 IO board without interfering with the fan. The hot air exit vents have also been moved to encourage airflow through the case. The built-in DC brushless fan connects to the four-pin fan header on a carrier board and runs from 5V DC (3.5–5.5V).
The case has slots for connecting CSI-2 cameras or DSI displays. Cut-outs in the side give access to HDMI, Ethernet, USB-A, and USB-C (power in) connectors and to the SD card slot. Inside, there is space for accessories such as an M.2 SSD or a PoE+ HAT+, and a mounting hole is provided for an external wireless antenna. The optional Compute Module 5 Passive Cooler can also fit inside.