Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Touch Display 2 is a 10.1-inch 1200x1920 multi-touch panel for Raspberry Pi projects that need a large interactive screen. It supports ten-finger touch with Raspberry Pi OS drivers and an on-screen keyboard, so a project can run without a keyboard or mouse. It connects with just two cables: power from the GPIO header and a ribbon cable to the DSI port. It works only with Raspberry Pi 5 and Compute Modules, so owners of older boards should look at the smaller 7-inch and 5-inch versions instead.
In stockShips from the UK · priced in GBP (£64.00) · duties may applyReturn policy
The Raspberry Pi Touch Display 2 - 10" is a 10.1" multi-touch display with a 1200x1920 panel. It is the largest display in the Raspberry Pi range, which also includes 7" and 5" options. It works with Raspberry Pi 5 and Compute Modules only.
Raspberry Pi OS provides touchscreen drivers with ten-finger touch and an on-screen keyboard, so no keyboard or mouse is needed. The display defaults to portrait orientation and can be rotated in software.
Two connections are needed: power from the GPIO port and a ribbon cable to the DSI port. A separate power breakout can power the display over USB and keep the GPIO pins free for a HAT. Compute Modules have no physical DSI port, so they need an IO board with a DSI connection. The display is not compatible with Pi 1 to 4, because it uses all four DSI lanes and needs the narrower, higher-bandwidth ribbon cable and the newer display connector found only on Raspberry Pi 5 and Compute Module IO boards.
