
Replacement 20" saw chain for Pinkway 56cc and 63cc 20" model
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a 20-inch replacement saw chain in .325 pitch, .058 gauge with 76 drive links, built to fit Pinkway 56cc and 63cc 20-inch gas saws and other .325-pitch bars of the same length. It uses full chisel cutters for fast, accurate cross-cutting and offset depth gauges that keep cuts from wandering into the sidewall. LubriTec oiling channels feed the bar and cutters to reduce friction and stretch wear. It suits woodcutters who run a .325 saw hard and want a durable chain rather than a budget OEM loop.
In stockReturn policy
This is a 20-inch replacement saw chain for Pinkway 56cc and 63cc 20-inch chainsaw models, including the gas-powered 20-inch power chain saw. It has a .325 pitch, a .058 gauge (1.5 mm) and 76 drive links, and it replaces the factory chain directly.
The chain uses full chisel cutters for fast, accurate cuts, with offset depth gauges that keep the cutters from driving into the sidewall of the cut for smoother results. Its cutters are blued for corrosion protection, and the chain is made of OCS-01 steel. LubriTec keeps the chain and guide bar oiled to reduce friction and extend life, and top-plate filing indicators help with accurate sharpening.
It fits saws from 38 to 62 cc. Check that your drive link is stamped 21, 31, K2 or 58J with 76 drive links, or that your bar reads 325 058 76DL. Sharpen the cutters at a 25-degree angle with a 3/16-inch file (part #70503) and keep .025 inch of depth gauge clearance. The chain may kick back and cause serious injury; use it only with experience and training for handling kickback.
It checks today's price at every store, compares the alternatives and answers in about a minute.