How fast do I have to work with it?

Pot life is about 15 minutes at 77°F, so measure and mix quickly and pour right away. Cooler room temperatures stretch that slightly; warmer ones shorten it.

Can I pour it thick in one go?

No. Keep each layer to 3/8 inch or less and let it set before adding the next. Deeper pours risk overheating and bubbles with a fast-curing resin.

How long until I can demold and handle pieces?

Demold time is roughly 2 to 4 hours, and full cure takes about 8 to 10 hours. Wait for full cure before sanding, polishing or using the piece under heat.

Will it yellow over time?

The formula is described as non-yellowing and UV resistant, which helps clear pieces and top coats keep their clarity. Long direct sun exposure is still the hardest test for any epoxy.

What is it best used for?

Coasters, jewelry, canvas art, decorative casting, aquarium repairs and clear top coats. Its short working time and layer limit make it a poor fit for large river tables or deep molds.

Combine Part A and Part B at 1:1 by volume, not by weight, and stir slowly to limit bubbles. The two parts come in separate bottles or jugs depending on package size.