
RGP 3,500 lbs Trailer Axle Hub & Drum Assembly Kit
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a pre-assembled hub and drum for 3,500 lb trailer axles with #84 spindles, the size used on Dexter E-Z Lube and Easy Grease axles. It fits standard 10-inch electric or hydraulic drum brakes and uses the common L68149 inner and L44649 outer bearing pair, so it matches the wheel ends most utility, cargo and equipment trailers already run. The kit arrives pre-greased with bearings, seal, studs, dust cap, lug nuts and spindle hardware, which saves a trip for loose parts. It is a single wheel end, not a pair, and the black painted finish is ordinary protection rather than a premium coating.
In stockReturn policy
This is a 3,500 lb trailer hub and drum assembly kit with a 5 on 5" bolt pattern. It is made for 10" electric or hydraulic drum brakes and 15" wheels, and fits Dexter E-Z Lube and Easy Grease axles with #84 spindles. It is also compatible with Dexter, AL-KO, Lippert, Rockwell and Besser Pro trailer axles.
The hub and drum have a black painted steel finish. The L68149 inner bearing and the 10-172 grease seal come installed, and the five 1/2" wheel studs are pressed in. The hub capacity is 1,750 lbs.
The kit arrives pre-greased and boxed with the outer bearing, both races, a dust cap with rubber plug, spindle hardware, lug nuts and plastic covers. Its replacement part numbers are Dexter 008-249-07 and Dexter K08-249-91.




