The Rheem RTEX-08 is an electric tankless water heater from the Professional Classic Series. It is made for point-of-use installation serving one or two applications, such as a low-flow faucet or a bathroom faucet. Its compact design fits in tight spaces. In warmer climates it can also supply a shower.
It has a powder-coated shell with an engineered polymer backplate. Copper immersion heating elements support temperature control and fast recovery of hot water. A stainless steel heat exchanger transfers heat quickly and resists corrosion. The inlet and outlet connections are brass 1/2" CF fittings on the side of the unit.
The unit mounts upright and does not need venting. Digital thermostatic controls adjust the temperature in 1-degree increments from 80°F to 140°F (26°C to 60°C). Self-modulating technology uses only the power needed to meet hot water demand. It has been tested and certified by the Water Quality Association against NSF/ANSI 372 for lead-free compliance.
- Model
- Professional Classic Series RTEX-08
- Power
- 8 kW
- Voltage
- 240 V
- Amperage
- 33 A
- Phase
- 1
- UEF
- 0.96
- Breaker
- 1 x 40 A double pole recommended
- Service panel
- 100 amp household electrical service panel recommended
- Wire size
- 8 AWG (75°C insulation) recommended
- Water connections
- 1/2" CF, brass, on the side
- Flow activation
- 0.3 GPM
- Temperature range
- 80°F to 140°F (26°C to 60°C), 1-degree increments
- Mounting
- Upright, with inlet and outlet connections on the side
- Venting
- Not required
- Heating elements
- Copper immersion
- Heat exchanger
- Stainless steel
- Construction
- Powder-coated shell, engineered polymer backplate
- Certification
- WQA tested to NSF/ANSI 372 (lead-free)
- Size
- Up to 93% smaller than a standard electric water heater
- Hot water output
- Up to 4 times that of a standard electric tank, per hour
- Flow rates
- Hand sink 0.5 GPM; kitchen sink 1 to 2 GPM; dishwasher 1 to 2 GPM; washing machine 1 to 1.5 GPM; water-saver shower head 1.5 GPM; standard shower head 2.0 GPM