Is the R872311 powerful enough for deck screws?

It handles most driving and light deck work, but 1,850 in-lbs is below full-size impacts. For long structural screws and repeated heavy driving, a full-size 18V driver is the better tool.

How does it compare with the previous RIDGID impact driver?

RIDGID says it is 25% more compact and 30% lighter than the previous model while keeping strong torque. The trade-off is that it is a subcompact, so it gives up some peak power to full-size drivers.

Does it come with a battery and charger?

No. The tool is sold as a bare tool in bulk packaging, and batteries and chargers are sold separately. Any RIDGID 18V battery works, and MAX Output packs give the best results.

What does the self-tapping mode do?

It is a fourth mode that stops the tool once a screw is fully seated. That helps prevent overdriving, breaking screws, and stripping heads, which is useful for repeated assembly work.

Does it qualify for RIDGID's Lifetime Service Agreement?

No. This item is explicitly not eligible for the Lifetime Service Agreement, so factor that into the value compared with RIDGID tools that are covered.

What bit holder does it use?

It is a standard 1/4-inch hex impact driver, so it takes common 1/4-inch hex bits and bit holders.

RIDGID 18V SubCompact Brushless Cordless Impact Driver R872311

Best price now

$69.08at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

RIDGID 18V SubCompact Brushless Cordless Impact Driver R872311

Best price now

$69.08at WalmartChecked Nov 11

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $69.08 at Walmart on Nov 11.

Our take on the RIDGID 18V SubCompact Brushless Cordless Impact Driver R872311

The RIDGID R872311 is an 18V brushless impact driver built for tight spaces and light-to-medium fastening. It delivers 1,850 in-lbs of max torque through three speeds plus a self-tapping mode that stops the tool once a screw seats, helping prevent overdriving and stripped heads. It is 25% more compact and 30% lighter than the previous RIDGID model, so it competes with subcompact drivers from Milwaukee and DeWalt on size rather than raw power. It suits homeowners, cabinet and trim work, and pros who want a light second driver; heavy framing and decking call for a full-size impact.

Best forHomeowners and DIYers wanting one light driverCabinet, trim and furniture assemblyPros needing a compact second driverWork in tight spaces overhead or in cabinets

Pros

Brushless motor with 1,850 in-lbs max torque
Three speeds plus self-tapping mode that stops at seat
25% more compact and 30% lighter than the previous model
Runs on any RIDGID 18V battery; best with MAX Output packs
Subcompact body fits cabinets and overhead work

Cons

Battery and charger sold separately
Bulk packaging, not retail boxed
Not eligible for the Lifetime Service Agreement
1,850 in-lbs trails full-size impact drivers

RIDGID 18V SubCompact Brushless Cordless Impact Driver R872311 prices at every store

WalmartNew
In stockSold by PINTO TOOLS LLCReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$69.08Free shippingChecked Nov 11
Visit Walmart

About the RIDGID 18V SubCompact Brushless Cordless Impact Driver R872311

The RIDGID 18V SubCompact Brushless Cordless Impact Driver (R872311) has a brushless motor with 4 drive modes. It delivers up to 1,850 in./lbs. of max torque and has 3 speeds.

A self-tapping mode helps prevent overdriving, breaking or stripping screws. It stops the tool once the screw is fully seated. The driver is 25% more compact and 30% lighter than the previous model.

It works with all RIDGID 18V batteries, and MAX Output batteries give the best results. The battery and charger are not included.

Model: R872311
Voltage: 18V
Motor: Brushless
Max torque: 1,850 in./lbs.
Drive modes: 4
Speeds: 3
Special mode: Self-tapping mode stops the tool when the screw is fully seated
Size: SubCompact
Color: Orange
Compatibility: All RIDGID 18V batteries; MAX Output batteries recommended
Not included: Battery and charger
Packaging: Bulk packaging
Service agreement: Not eligible for the Lifetime Service Agreement

Specifications

color: OrangeSource
size: SubCompactSource

Questions and answers

Is the R872311 powerful enough for deck screws?: It handles most driving and light deck work, but 1,850 in-lbs is below full-size impacts. For long structural screws and repeated heavy driving, a full-size 18V driver is the better tool.
How does it compare with the previous RIDGID impact driver?: RIDGID says it is 25% more compact and 30% lighter than the previous model while keeping strong torque. The trade-off is that it is a subcompact, so it gives up some peak power to full-size drivers.
Does it come with a battery and charger?: No. The tool is sold as a bare tool in bulk packaging, and batteries and chargers are sold separately. Any RIDGID 18V battery works, and MAX Output packs give the best results.
What does the self-tapping mode do?: It is a fourth mode that stops the tool once a screw is fully seated. That helps prevent overdriving, breaking screws, and stripping heads, which is useful for repeated assembly work.
Does it qualify for RIDGID's Lifetime Service Agreement?: No. This item is explicitly not eligible for the Lifetime Service Agreement, so factor that into the value compared with RIDGID tools that are covered.
What bit holder does it use?: It is a standard 1/4-inch hex impact driver, so it takes common 1/4-inch hex bits and bit holders.
Where is the RIDGID 18V SubCompact Brushless Cordless Impact Driver R872311 cheapest?: At Walmart, for $69.08, as of our latest check.
What do buyers say about the RIDGID 18V SubCompact Brushless Cordless Impact Driver R872311?: Rated 5 out of 5 from 2 ratings.