
Ridgid Oscillating Belt Sander 4" Dust Chute Shroud
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a 3D-printed dust shroud that replaces the stock 2.25" port on the Ridgid oscillating belt sander with a 4" connection for a dust collector or shop vacuum hose. The larger opening moves more air, so less dust escapes at the belt and the work stays visible. It is aimed at owners of that sander who already run 4" ducting and want better capture than the factory port gives. Fitting it takes minor modification to the sander's table, and it is a printed part rather than a molded factory accessory, so expect visible layer lines and a color that varies with filament supply.
In stockReturn policy
This is a 4" dust shroud for the Ridgid Oscillating Belt Sander. It replaces the sander's stock 2.25" dust port with a 4" connection to a dust collection system, capturing dust at the source instead of letting it disperse into the air.
The shroud is 3D-printed from durable material. It attaches to the sander's table, and it does not need to be removed to replace the sanding belt or to switch to the spindle sander.
It mounts one of two ways. The more secure method is to mark and drill two holes in the sander's table, tap them for #8-32 machine screws, and fasten the shroud down; the screws are not included. To avoid modifying the table, VHB double-sided foam tape can be used instead, applied to the cleaned bottom of the shroud and pressed onto the table, though the shroud may be harder to remove that way.