It is non-powered, so it needs a separate amplifier. It is rated at 250 watts RMS and 500 watts peak.
The subwoofer has a linear spider with embedded 16 AWG tinsel leads. Integrated spider venting, a bumped vented backplate and an extended pole piece are part of its build. It is CEA-2031 compliant.
It connects with wired push terminals and a compression speaker connector. It can be used in sealed or vented enclosures. A soft touch ABS trim ring is included.
- Speaker type
- Subwoofer, 1-way
- Amplification
- Non-powered
- Power handling
- 250 watts RMS, 500 watts peak
- Impedance
- 4 ohms
- Voice coil
- Single (not dual voice coil)
- Sensitivity
- 86 dB (@ 1 W/1 m)
- Frequency response
- 25 Hz (Fs)
- Enclosure
- Sealed or vented
- Connectivity
- Wired
- Ports
- Push terminals, compression speaker connector
- Mounting type
- Car mount (not shallow mount)
- Mounting depth
- 6.0 in. (152.4 mm)
- Top-mount depth
- 5.992 in.
- Depth
- 14.9 cm
- Height
- 19 in.