ROCKMIX 2BT

Record a vocal and instrument together, host a two-person stream, or mix a small live performance from a compact desktop setup. The Rockville ROCKMIX 2BT brings two main input channels, Bluetooth playback and a USB recording interface into a mixer measuring 3.9 x 5.3 x 1.65 inches.

Both channels have XLR and 1/4-inch TRS combo inputs. Use Channel 1 for a microphone and switch Channel 2 between microphone and instrument levels to suit your source. Switchable +48V phantom power supports condenser microphones on both channels, while a separate 3.5mm mic input accommodates an additional microphone.

Bring in backing tracks from your phone over Bluetooth 5.0, then shape each main channel with bass, treble, pan and level controls. RCA left and right outputs feed powered speakers, an amplifier or a recording device. The 3.5mm headphone output and separate main and monitor level controls let you adjust listening volume independently.

Connect the mixer to a Mac or PC over USB to send the stereo master mix to your recording or streaming software. USB recording captures the mixed stereo output rather than separate tracks for each input. The plug-and-play interface requires no external drivers, and a USB playback switch routes computer playback to the main mix or monitor. Power the mixer from your computer, the included USB adapter or a suitable 5V power bank.

Connections and Controls

• Two XLR/1/4-inch TRS combo inputs; Channel 2 has switchable mic/instrument operation

• Switchable +48V phantom power on Channels 1 and 2

• Additional 3.5mm microphone input

• Bluetooth 5.0 music streaming

• Two-band EQ, pan and level controls on each main channel

• RCA left/right master outputs and 3.5mm headphone output

• Independent main mix and headphone/monitor level controls

• USB playback routing to main mix or monitor

• USB interface sends the stereo master mix to a Mac or PC for recording or streaming

Specifications

• Product type: 2-channel mixer with USB audio interface and Bluetooth

• Frequency response: 20Hz–22kHz

• Total harmonic distortion: 0.05% or less

• Signal-to-noise ratio: 80dB

• Channel 1 and 2 XLR sensitivity/impedance at maximum gain: 2mV / 1.8k ohms

• Channel 1 jack sensitivity/impedance in line mode: 10mV / 12k ohms

• Channel 2 jack sensitivity/impedance: 30mV / 20k ohms in line mode; 30mV / 240k ohms in guitar mode

• Maximum output level, main and monitor: 5.8V

• Bass EQ: ±15dB at 80Hz