

Prices are checked against each store and labelled with when.
The Rockville RV1212P bundle pairs two 12-inch subwoofers in a vented, angled enclosure with an Autotek MM-2025.2D Class D amplifier and a 4 AWG wiring kit. The enclosure is rated 1200W peak and 600W RMS, built from braced MDF with tweed carpet and an under-side aero port. The amplifier runs 2 x 500W at 4 ohms, 2 x 1000W at 2 ohms, or 2000W bridged at 4 ohms. It suits shoppers who want a complete bass setup in one box rather than matching parts separately; the trade-off is a large, heavy cabinet and modest power headroom against premium brands.
In stockSold by AudiosavingsReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Bundle Overview The Rockville RV1212P bundle combines a dual 12 inch car audio subwoofer system with an Autotek MM-2025.2D 2-channel Class D amplifier and a Rockville RWK41 4 AWG amplifier wiring kit. The RV1212P package contains two 12 inch subwoofers mounted in a vented enclosure. The MM-2025.2D amplifier provides 2-channel or bridged mono operation. The RWK41 installation kit supplies power, ground, signal cables, and hardware for audio system installation. Subwoofer Performance The RV1212P enclosure is rated at 1200 watts peak power, 600 watts RMS continuous music power, and 400 watts RMS test tone rating. Constructed from bonded, stapled, and braced 3/5 inch MDF with high-quality aviation-grade tweed carpet, the cabinet features an under-side bass reflex aero-port system and a 15-degree angle. Each 12 inch woofer includes an injection-molded talc-filled brushed polypropylene cone, butyl rubber surround, 3D molded dust cap, linear progressive spider, 4-layer aluminum voice coil, and a 60oz magnet structure. Technical specs include a 35Hz to 500Hz frequency response and 101dB SPL at 1w/1m. Amplifier Operation The Autotek MM-2025.2D is a 2-channel Class D bridgeable amplifier providing 2000 watts maximum power. Output ratings include 2 x 1000 watts at 2 ohms, 2 x 500 watts at 4 ohms, and 1 x 2000 watts bridged mono at 4 ohms. The amplifier features PRO-FI High-Speed MOSFETs, TCID Twin Coil Isolation Design, a low-noise preamplifier circuit, variable 12dB per octave electronic high-pass and low-pass crossovers from 40Hz to 400Hz, built-in bass control, 0.2V to 6V variable voltage, a 10Hz to 22kHz frequency response, and THD under 0.05%. Installation Components The RWK41 4 AWG wiring kit includes a 17-foot 4 AWG translucent blue SuperFlex power cable, 3-foot 4 AWG translucent black SuperFlex ground wire, 17-foot 18 AWG blue remote cable, 17-foot 16 AWG translucent blue SuperFlex speaker wire, and a 17-foot 100% copper twisted pair RCA cable. The kit includes a gold-plated heat-resistant AGU fuse holder, 60 amp AGU fuse, 100 amp AGU fuse, 7-foot split loom tubing, wire ties, ring terminals, butt connectors, spades, and grommets. The PVC outer jacket withstands temperatures from -40 to 220 degrees F. Build and Connectivity The RV1212P cabinet weighs 36.45 lbs, measures 29.4" L x 18.4" W x 15.9" H, and features gold-plated push-style speaker terminals. The MM-2025.2D amplifier features a black aluminum alloy heatsink with illuminated logo, PWM power supply, nickel-plated brass terminals with hex set screws, 4 AWG power terminals, 12 AWG speaker terminals, 60A external fusing, LED diagnostic indicators, RCA inputs, and full-range RCA pre-amp outputs for signal pass-through.
It checks today's price at every store, compares the alternatives and answers in about a minute.





