Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Rockville VS10K52 is a single 10-inch car subwoofer already mounted in a vented enclosure, so it drops into a trunk without separate box shopping. Rockville rates it at 300 watts RMS and 1,200 watts peak with a 2-ohm final impedance, and the box is built from 3/4-inch MDF. It suits budget-minded drivers who want added low end from a stock or aftermarket head unit and a small amp. Against separate sub-and-box setups it saves assembly work, but it sits below premium brands on power handling and build refinement.
In stockReturn policy
The Rockville VS10K52 is a single 10-inch car subwoofer that comes pre-loaded in a vented enclosure. It is rated at 1200 watts peak, 600 watts program and 300 watts continuous RMS, with a final impedance of 2 ohms.
The enclosure is made of 3/4-inch MDF that is bonded, stapled and braced. It has computer-designed vents, is angled at 15 percent, and is covered in aviation-grade tweed carpet. Speaker wire connects through satin nickel push terminals. The enclosure air space is 1.0 cu ft and it is tuned to 35 Hz.
The subwoofer has a fiber-reinforced, non-pressed paper cone with a thick foam surround and blue stitching cone reinforcement. It also has a polypropylene dust cap, a cast iron basket with a black sanded finish, and a 40 oz magnet. The 2-inch 4-layer black aluminum voice coil is wound with OFC copper wire. A vented hole in the T-yoke helps dissipate heat, and a Rockville-branded mounting gasket helps seal the sub air-tight when mounting.
