
Romswi Infrared Heater
Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Romswi is a 1500W portable space heater that combines an infrared quartz tube with a PTC fan-forced element, so it radiates heat like a panel and blows warm air like a fan heater. It runs on High (1500W) or Low (1200W), adds an Eco mode that trims power as the room warms, and holds a set temperature from 30°F to 99°F within about ±2.5°F. A remote, 1–12 hour timer, preset start, caster wheels and a dimmable display make it easy to move and schedule, and it carries tip-over, overheat, sensor-failure and fan-failure protection. It suits bedrooms, living rooms and offices where quiet overnight heat matters more than heating a whole floor fast.
In stockReturn policy
The Romswi Infrared Heater is an electric space heater for indoor rooms such as living rooms, bedrooms, offices, and nurseries. It combines an infrared quartz tube with PTC fan-forced heating. You can choose High (1500W), Low (1200W), or Eco mode.
Eco mode automatically adjusts power based on room temperature to help reduce energy use. The digital thermostat sets a temperature from 30°F to 99°F with ±2.5°F accuracy. Four caster wheels let you roll it from room to room. The included remote control adjusts power, heating mode, temperature, and a 1 to 12 hour timer. A preset start function can warm the room ahead of time.
Night Mode reduces temperature sampling for less disturbance while you sleep. The display can be dimmed or turned off while the heater keeps running. After power-off, the fan runs for 30 seconds to cool internal components. Safety features include tip-over shutoff, overheat protection, NTC sensor failure alerts, and fan malfunction detection. The heater stops automatically when it detects an unsafe condition and shows an error code.








