This is a replacement entry door lock for travel trailers, cargo trailers, horse trailers and small vans. It fits a 2-3/4" x 3-3/4" hole cutout and doors from 1-1/4" to 1-1/2" thick. It is built for doors with the hinges on the right side and replaces Trimark and Bargman-style locks.
The lock body is die-cast zinc alloy with a black nylon shell. It has a built-in deadbolt plus a rear lock, so the door locks at two points. Four keys are included.
To install, unscrew the four back screws, two side screws and plate to remove the old lock, then insert the front half into the door opening. Attach the striker plate with the shorter screws, align and connect the rear portion to the front handle, and hand-tighten the screws. Close the door and test it; do not use an impact wrench.
- Material
- Die-cast zinc alloy
- Shell
- Black nylon
- Hole cutout
- 2-3/4" x 3-3/4"
- Door thickness
- 1-1/4" to 1-1/2"
- Hinge side
- Right-hand doors only
- Locking
- Built-in deadbolt and rear lock
- Keys included
- 4
- Compatibility
- Travel trailers, cargo trailers, horse trailers, small vans; replaces Trimark and Bargman-style locks
- Not compatible with
- Class A and Class C RVs
- In the box
- 1 x door lock panel, 2 x installation clips, 4 x keys, 10 x screws, 1 x installation manual
- Installation
- Hand-tighten screws; do not use an impact wrench