What is a 24-tooth blade best for?

Fast ripping and rough cutting. The low tooth count clears material quickly but leaves a rougher edge than a 40- or 60-tooth blade.

Will it fit my table saw or miter saw?

It is a 10-inch blade with a standard arbor, so it fits most 10-inch table saws and miter saws. Check your saw's arbor size before mounting.

Can it cut treated lumber?

Yes. Delta describes it for dry or treated lumber, and carbide tips handle the grit in treated wood better than steel teeth.

Does the thin kerf matter?

It removes less wood per cut, so the saw works less hard. The trade-off is a slightly less rigid plate in heavy cuts.

Is it good for smooth finish cuts?

No. For trim, veneer or glue-ready edges, use a blade with more teeth. This one is built for speed.

What do buyers say about the S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade?

Rated 4.2 out of 5 from 16 ratings.

Where can I buy the S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade?

2 stores we checked sell it, including Walmart, Zaffy.

Delta

S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade

Best price now

$9.47at ZaffyChecked Nov 12

Compared across 2 stores. Prices are checked against each store and labelled with when.

Visit Zaffy

Delta

S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade

Best price now

$9.47at ZaffyChecked Nov 12

Compared across 2 stores. Prices are checked against each store and labelled with when.

Visit Zaffy

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $9.47 at Zaffy on Nov 12.
Checked at 2 stores.

Our take on the S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade

The Delta ShopMaster is a 10-inch, 24-tooth carbide-tipped blade meant for fast ripping and general cutting in dry or treated lumber. Its thin kerf removes less material, so it cuts with less load on the saw. It fits both table saws and miter saws. With only 24 teeth, it favors speed and rough work over smooth finish, so it competes with other rip blades rather than with fine-tooth general-purpose or finishing blades.

Best forRipping lumber on a table sawFraming and rough construction cutsCutting treated or wet lumberDIYers who want one fast, durable blade

Pros

Carbide tips hold an edge longer than steel teeth
Thin kerf reduces cutting resistance
24 teeth clear material quickly
Works on table saws and miter saws
Handles dry and treated lumber

Cons

24 teeth leave a rougher cut than higher-tooth blades
Not suited to fine trim or smooth crosscuts
Thin kerf plate can flex in heavy cuts
Few owner reports to judge long-term edge life

S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade prices at every store

ZaffyNew
In stockSold by Aromatica s.r.l.Ships from Italy · duties may apply
$9.47Checked Nov 12
Visit Zaffy
WalmartNew
In stockSold by MLLH GOODSReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$22.17Checked Nov 12
Visit Walmart

S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade price history

Lowest price we've seen: $9.47 on Nov 12 at Zaffy. Tracked across 1 store since Nov 12.

What reviewers say

4.2 / 516 ratings

Buyers rate it well overall, with a 4.2 average from 16 ratings. Most comments center on fast, clean-enough ripping and the thin kerf's easy cutting.

What people mention

Cut speedPraisedOwners say it moves quickly through lumber, especially when ripping.
Cut finishMixedThe 24-tooth pattern leaves a rougher edge, which some buyers accept for rough work and others dislike.
KerfPraisedThe thin kerf is described as cutting with less effort and load.
DurabilityPraisedCarbide tips are reported to stay sharp through repeated use.

About the S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade

The Delta ShopMaster is a 10-inch general purpose saw blade with 24 carbide-tipped teeth. It cuts dry or treated lumber and is used for both ripping and crosscutting wood.

The carbide tips are built for long blade life. A thin kerf design makes the cuts smooth. The blade is compatible with table saws and miter saws.

Model: S36-1024T58
Brand: Delta
Series: ShopMaster
Blade size: 10 in
Teeth: 24
Tooth type: Carbide tipped
Kerf: Thin
Cuts: Ripping and crosscutting in dry or treated lumber
Compatibility: Table saws, miter saws

Specifications

size: 10"Source

Questions and answers

What is a 24-tooth blade best for?: Fast ripping and rough cutting. The low tooth count clears material quickly but leaves a rougher edge than a 40- or 60-tooth blade.
Will it fit my table saw or miter saw?: It is a 10-inch blade with a standard arbor, so it fits most 10-inch table saws and miter saws. Check your saw's arbor size before mounting.
Can it cut treated lumber?: Yes. Delta describes it for dry or treated lumber, and carbide tips handle the grit in treated wood better than steel teeth.
Does the thin kerf matter?: It removes less wood per cut, so the saw works less hard. The trade-off is a slightly less rigid plate in heavy cuts.
Is it good for smooth finish cuts?: No. For trim, veneer or glue-ready edges, use a blade with more teeth. This one is built for speed.
Where is the S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade cheapest?: At Zaffy, for $9.47, as of our latest check.
What do buyers say about the S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade?: Rated 4.2 out of 5 from 16 ratings.
Where can I buy the S36-1024T58 Delta ShopMaster 10 inch 24 Teeth Saw Blade?: 2 stores we checked sell it, including Walmart, Zaffy.