This is a santoku knife made by Sakai Takayuki in Sakai, Japan. It has a VG10 stainless steel core from Takefu Special Steel, clad in stainless Damascus steel in a sanmai construction. The blade surface has a tsuchime, hand-hammered finish, and each knife is hand sharpened.
The VG10 core is hardened to 60 HRC or more, with the maker listing 60 to 61 HRC. VG10 is chosen for edge retention, sharpness and resistance to staining. The blade measures 179 mm, the knife is 309 mm overall, and the spine is 1.8 mm thick, tapering to 0.8 mm at 1 cm from the tip.
Wash the knife by hand and wipe it dry; it is not dishwasher safe. Sharpen it by hand on a waterstone, as a honing rod is not suitable for Japanese knives. Use it for normal kitchen cutting, not on frozen food and not as a screwdriver.
- Knife type
- Santoku
- Steel
- VG10 stainless steel core from Takefu Special Steel, Japan
- Hardness
- 60 HRC or more (60–61 HRC)
- Construction
- Sanmai, stainless Damascus clad
- Finish
- Tsuchime, hand hammered
- Blade length
- 179 mm (7 in)
- Overall length
- 309 mm
- Blade thickness
- 1.8 mm at the spine, 0.8 mm at 1 cm from the tip
- Maker
- Sakai Takayuki (Sakai)
- Care
- Hand wash and wipe dry; no dishwasher
- Sharpening
- By hand on a waterstone; honing rod not suitable
- Use
- Not for frozen food or as a screwdriver