Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The SawStop Scale Miter Gauge is a precision aftermarket miter gauge for table saws. Its head has 90 detents in 1° increments on each side of zero, plus 22.5° stops, and a Vernier scale that lets you dial in any angle to a tenth of a degree. An 18-inch miter bar with six adjustable washers takes up slop in the slot, and the aluminum fence telescopes to reach 31 inches with a dual-arm flip stop. It suits woodworkers who cut segments, picture frames and joinery and want repeatable angles without a digital readout. Against typical stock miter gauges it adds fine angle control and a longer fence, but it is a heavier, more expensive accessory than a simple gauge.
In stockReturn policy
The Scale Miter Gauge is a table saw accessory for making accurate angled cuts and repeat crosscuts. The miter head has a pointer and 90 notches in 1° increments on each side of 0°, for 180 locked-in angles. One notch on each side is set at 22.5°. A Vernier scale allows any angle to be fine-tuned in 1/10° increments.
The 18 in. miter bar has six adjustable washers that remove play in the miter slot while letting the gauge glide smoothly forward and back. The aluminum fence gives workpieces a large reference surface. A telescoping extension reaches up to 31 in. with the flip stop. The scale on top of the fence can be calibrated, so crosscuts can be made without measuring and marking each board.
The flip stop is used to repeat cuts at the same setting for identical parts. It indexes on the fence in 1/32 in. increments. Its dual arms can be set independently at different lengths from the blade or linked together, and a micro-adjuster fine-tunes either setting.
