The Scalable Video Switch (SVS) Control Module is the core module of an SVS build. It holds the control logic that switches all of the input and output modules, and every SVS build requires it.
It supports up to 32 inputs and 6 outputs. The input count can be expanded to 248 with the upcoming Expansion Modules. An infrared receiver records IR codes and allows manual switching with the optional infrared remote accessory. A 3.5mm IR blaster port plays back IR codes, so profiles and settings can load automatically on your scaler for each input. An SD card stores and edits IR codes and other configuration settings.
The module is powered through its USB C port, which also handles firmware updates and serial communication with a PC over USB. It does not support the USB Power Delivery standard. Some Power Delivery adapters throttle power to the 750 mA USB 1.0 minimum, which is not enough for the SVS, so a non Power Delivery supply gives the best results.
- Inputs
- Up to 32 (expandable to 248 with the upcoming Expansion Modules)
- Outputs
- 6
- Ports
- 1 x USB C, 1 x 3.5mm IR blaster
- Storage
- SD card slot for IR codes and configuration settings
- IR receiver
- Records IR codes; manual switching with the optional infrared remote accessory
- Power
- Via USB C, +5V 1.5A minimum
- Power supply
- Non Power Delivery supply recommended
- Connectivity
- Serial communication over USB to a PC
- In the box
- 1 x SVS Control Module PCB, 1 x SVS Control Module shell, 2 x SVS endcaps, 8 x M3 20mm screws, 4 x M3 25mm hexagonal standoffs, 1 x 3.5mm IR blaster cable