The SCULPFUN S10 is a desktop diode laser engraver with a 10W output, twice the power of the S9, while keeping the same 0.08mm focused beam. Its high-speed air assist nozzle is shaped to get more from the same compressor, pushing airflow up to 14.5 m/s at 30 L/min and 0.03 MPa. That combination gives deeper, faster cuts in dense woods and cleaner cut edges, since the airflow blows residue away. It suits hobbyists and small shops cutting wood and engraving on a desktop, but it is a diode machine, so it is slower and less capable than CO2 or fiber lasers on thick stock and clear acrylic.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
Owners rate the S10 highly, with 4.6 out of 5 from 21 ratings.
The SCULPFUN S10 is a desktop laser engraver and cutter with a 10W laser output, twice that of the S9. The laser keeps the same ultra-thin 0.08mm focus as the S9. It has an all-metal body and an industrial high-precision linear slide rail on the X-axis.
A high-speed air assist nozzle uses a fluid-dynamics design to get more from the air pressure. With a 30L/min, 0.03Mpa air compressor, it sprays airflow at up to 14.5m/s. The airflow blows residue away from the cut. The laser can cut many high-density woods.
The 32-bit motherboard works with Lightburn and LaserGRBL. It reserves Z-axis and limit switch functions for future upgrades. The original engraving area is about 385x385mm. The optional S10 Y-axis extension kit expands it to 400x920mm. The X and Y axes carry scale lines for measuring objects.
