It promotes both aerobic nitrification and anaerobic denitrification. Its pore size suits anaerobic bacteria, so it works as a biological filter and does not produce hydrogen sulfide.
It can be used in drip trays, canister filters, sumps, and box filters. Place it so water flows through it, such as in a canister filter, chemical filtration module, or box filter. Rinse off dust before use. Keep the flow rate at or below 200 L (50 US gallons) per hour. If higher flow rates are unavoidable, use Matrix or Pond Matrix instead.
After several days in use, nitrate concentrations should start to fall. They level off gradually at about 4 to 5 mg/L as nitrate. The media is not exhausted as long as nitrate stays under control. If initial nitrate is very high, bring it below 20 mg/L with water changes first. Use enough media to remove nitrate at least as fast as it forms.
- Brand
- Seachem
- Size
- 100 mL
- Use in
- Drip trays, canister filters, sumps, box filters
- Max flow rate
- 200 L (50 US gallons) per hour
- Coverage
- Each 500 mL treats about 100 to 200 L (25 to 50 US gallons), depending on initial nitrate and biological load
- Expected nitrate level
- About 4 to 5 mg/L as nitrate