Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Sealey ABI1700COMBO is an indirect-fired space heater rated at 50kW (170,000 Btu/hr). Unlike direct-fired heaters, it routes exhaust fumes out through the included 5m flexible duct, so it delivers clean, dry, fume-free heat where people are present or ventilation is limited. It runs on kerosene or diesel from a 69L tank, moves 2,000 m³/h of air, and adds a thermostat, electronic flame control, a flame-out safety device, a Danfoss pump and a stainless steel combustion chamber. Large wheels and a handle make it movable on site. It suits marquees, halls, workshops, warehouses and construction work; against smaller direct-fired units it trades portability and simplicity for fume-free output and higher heat.
In stockShips from the UK · duties may applyReturn policy
This is an indirect-fired heater that runs on kerosene or diesel. It produces 50kW (170,000Btu/hr) of heat and moves 2000m³/h of air. Combustion by-products leave through a flue at the top of the heater, so the heated air is clean, dry and free of fumes.
It comes with 5m of flexible ducting that carries exhaust fumes safely away. The ducting is 250mm wide and made from glass fibre. It is flame and heat retardant to 300°C and packs down for transport. The heater suits marquees, events, halls, workshops, warehouses and construction sites, including poorly ventilated spaces.
A thermostat measures the room temperature and switches the heater on and off to hold the temperature you set, which saves fuel. Electronic flame control and a built-in flame sensor cut the fuel supply if the flame goes out or the fuel runs out. The combustion chamber is stainless steel with fan cooling, and the pump is a Danfoss. Large wheels and a handle make it easy to move and position on site.
