
Seeed Studio reSpeaker Clip Open Wearable AI Recorder
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The reSpeaker Clip is an open, wearable AI voice recorder built for developers and tinkerers. Dual PDM microphones capture 360° audio up to 3 m, and 2 GB of onboard memory lets it record without a phone attached. A 0.5-inch OLED, Action Button and vibration feedback handle control on the device. Unlike closed recorders such as the Plaud NotePin, it runs on nRF Connect SDK / Zephyr RTOS with a Python host SDK, so transcription and AI notes depend on software you configure, not the device alone.
In stockShips from Germany · priced in EUR (€114.94) · duties may applyReturn policy
The reSpeaker Clip is a wearable AI recorder for capturing voice, interviews and other audio. Two PDM microphones pick up sound in 360° around the device at a range of up to 3 m, sampling at up to 16 kHz. Audio is stored in 2 GB of onboard memory, so a phone does not need to stay connected during normal independent recording.
A 0.5-inch 88 × 48-pixel OLED shows recording status, and an Action Button with vibration feedback lets you mark moments. Two recording modes are available: Endurance provides up to 18 hours per charge, while Enhanced adds noise reduction and gain processing for up to 14 hours. Audio is recorded as Opus mono at 32 kbps, and the specification lists approximately 140 hours of compressed audio, with actual capacity depending on encoding and recording mode.
The device is built on nRF5340 and nRF7002 hardware with Bluetooth 5.3 (BLE) and Wi-Fi 6 for wireless control and file transfer, and it charges through four magnetic contacts on its USB-C charging base. It can be worn with the magnetic patch, lapel clip or neck lanyard. The SenseCraft Voice App handles file management, transfer and processing through configured speech-to-text and language-model services; transcription, AI notes and summaries require that configured local or cloud workflow and are not performed solely by the device's microcontrollers. A Python host SDK and firmware built on nRF Connect SDK / Zephyr RTOS support device control, file synchronization and custom application workflows.