This is a left-handed, full-size semi-hollow double-cutaway electric guitar kit with six steel strings. The body is laminated maple with a thin flamed maple veneer top, about 0.5 mm thick, multi-ply ivory binding and two f-holes. A full-length alder center block runs inside the body. The body arrives unfinished.
The maple neck has a skunk stripe, single ivory binding and a C-shaped profile. It is set in, and it must be aligned and glued before finishing. The rosewood fretboard has 22 medium jumbo stainless steel frets and white pearloid trapezoid inlays. The two-way truss rod is adjusted at the headstock.
Two ceramic-magnet humbuckers are controlled by two volume knobs, two tone knobs and a 3-way toggle switch. The wiring harness is pre-wired, and the electronics still need soldering. All cavities, holes and channels are pre-cut, so no woodworking or routing is needed. This is an advanced build, rated 8/10. The veneer is easy to sand through, so sand the edges lightly.
- Dexterity
- Left-handed
- Strings
- 6, steel
- Size
- Full size
- Build difficulty
- Advanced (8/10)
- Body
- Laminated maple (plywood), semi-hollow, double cutaway
- Body top
- Flamed maple veneer, about 0.5 mm thick
- Sound holes
- 2 f-holes
- Internal support
- Full-length alder center block
- Body binding
- Multi-ply ivory
- Neck
- Maple with skunk stripe, set-in, C-shaped profile
- Neck binding
- Single ivory