Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai
S
Shaker Unfinished High Wall Cabinet Single Door

Shaker Unfinished High Wall Cabinet Single Door

Last price we saw

$184.38at RTA Direct, last seen Nov 1

Prices change often: ask the agent below to check today's price at every store.

Prices are checked against each store and labelled with when.

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the Shaker Unfinished High Wall Cabinet Single Door

This is a single-door Shaker wall cabinet, 18 inches wide, 30 inches tall and 12 inches deep, with two shelves. It ships unfinished, so you stain or paint it to match your kitchen or bath. The Shaker frame and flat recessed panel suit both traditional and modern rooms. It is a stock-size cabinet, so check that 18 by 30 inches fits your layout before ordering.

Best forKitchen wall storage in a small gapBathroom or laundry room cabinetDIYers who want to match an existing finish
Remodelers using stock cabinet sizes
Pros
  • Unfinished surface takes paint or stain in any color
  • Shaker door style fits most kitchen designs
  • Two shelves give three usable storage levels
  • Standard 12-inch depth clears most countertops
  • Single door keeps a narrow 18-inch run tidy
Cons
  • Needs sanding, priming and finishing before install
  • No hinges or handle included on most unfinished cabinets
  • Particleboard or plywood box quality varies by maker
  • 30-inch height may not line up with existing upper cabinets
  • Single door means no divided storage

Shaker Unfinished High Wall Cabinet Single Door prices at every store

  • RTA DirectCheck price at RTA Direct

Shaker Unfinished High Wall Cabinet Single Door price history

Lowest price we've seen: $184.38 on Nov 1 at RTA Direct. Tracked across 1 store since Nov 1.

Specifications

Type
Wall
Door Style
Shaker
Height
30″ high
Width
18″ wide
Depth
12″ deep
Shelf Count
2 shelves

Questions and answers

Is an unfinished cabinet cheaper than a finished one?
Usually yes, because you supply the labor. The savings come from skipping the factory finish, not from thinner materials, so compare box construction before you buy.
What do I need to finish it?
Sand lightly, prime bare wood or particleboard edges, then paint or stain and seal. Budget a few hours plus drying time per cabinet.
Will it match standard upper cabinets?
Check height and depth against your existing run. Standard uppers are often 12 inches deep and 30 or 36 inches tall, so an 18 by 30 cabinet lines up with 30-inch uppers.
Are hinges and a handle included?
Often not on unfinished stock cabinets. Confirm with the listing and budget for a door hinge and knob or pull.
Can I hang it over a refrigerator or toilet?
Yes if the wall is solid and the cabinet is anchored into studs. At 30 inches tall it leaves little clearance over a fridge, so measure first.