
Shallow Well Pump Portable Garden Jet Pump W/ Auto Controller 1.5 HP 1200 GPH
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a portable shallow well jet pump with a 1.5 HP copper motor, a built-in automatic pressure controller, and 1-inch inlet and outlet. It draws up to 1200 GPH and lifts water to about 157 ft, which suits garden sprinklers, shallow wells, and boosting household water lines. The cast iron and stainless steel body with an IP44 controller is built for outdoor use. Compared with basic jet pumps, the auto controller and portable floor-standing frame are the main draws; it is not a deep-well or submersible pump, so it only works where the water table is shallow.
In stockSold by Staple & Co.Returns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a shallow well pump with an automatic controller, built for moving clean water from a shallow source. The pump body is made of cast iron, silicon steel, aluminum, stainless steel and plastic, with a painted and polished finish, and it runs on a pure copper motor. It stands on the floor and needs to be assembled before use.
The pump runs at 1100 W (1.5 hp) and 3420 rpm, with a maximum flow rate of 1200 GPH, a maximum delivery lift of 48 m (157.48 ft) and a maximum pressure of 87 psi. Both the inlet and the outlet are 1 in. Noise is rated at 30–50 dB. It operates on 110V at 60 Hz, up to a maximum of 115V, and draws 7.0 A.
Suction reaches about 8 m (26.2 ft), and the pump is meant for clean water only. It can serve as a sprinkler pump, well pump or booster pump for garden irrigation, farmland water conveyance, pool water exchange, water heater filling and household water pressure. Fill the pump head with water until it is full before running it, never run the pump without water, and keep the inlet pipe, which is not included, from bending.