
SHENCAIOU 1 Ton Manual Arbor Press
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The SHENCAIOU 1 Ton Manual Arbor Press is a benchtop, hand-operated press with a steel frame, a rack-and-ratchet lever and a 1-ton rated capacity. It is built for light jobs: pressing bearings, pins and shaft sleeves, stamping thin sheet, riveting and straightening small parts. It weighs about 20 lb net and stands roughly 20 in tall, so it clamps to a workbench rather than standing on the floor. Against hydraulic shop presses it gives up force and speed but offers finer, more controlled feel for small precision work, and it is far cheaper than a floor press of similar reach.
In stockSold by Shencaiou Co.ltdReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The SHENCAIOU 1 Ton Manual Arbor Press is a hand-operated workshop press with a steel body and a black paint finish. The finish protects against rust and wear, and the press needs minimal maintenance.
It is used to disassemble bearings, pins, and shaft sleeves, stamp thin metal sheets, rivet, and straighten small parts. It suits mechanical maintenance, model studios, teaching demonstrations, and low-volume production.
For safe use, secure the press to a workbench and center the workpiece under the ram. Keep hands away from the ram and workpiece, wear eye protection, and do not exceed the travel limit. Apply light oil to the ratchet and rack periodically.
