
Shop-Vac 9653606 6 Gallon 3.5 Peak HP Contractor Series Wet & Dry Vacuum
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Shop-Vac 9653606 is a 6-gallon wet/dry vacuum in the Contractor Series, built for job-site cleanup and garage use. It delivers 85 CFM of airflow and 55 inches of sealed pressure through a 1.25-inch hose, with a blower feature and on-board dolly tool storage. The 12-foot cord and included nozzles (floor, Gulper, crevice) cover most spills and debris without hunting for outlets. Compared with larger contractor vacs, its 6-gallon tank is easier to carry and store, but it holds less before emptying.
In stockReturn policy
The Shop-Vac 9653606 is a 6-gallon wet/dry vacuum from the Contractor Series, built to pick up both wet messes and dry debris. It runs on 120V at 60Hz and draws 8.1 amps, with a 12-foot cord.
A 1.25-inch diameter Lock-On hose connects to the tank, and the vacuum also works as a blower. Airflow reaches a maximum of 85 CFM, sealed pressure is 55 inches, and peak air watts are 150. The unit was ASTM tested with a 1.25-inch Shop-Vac diameter hose.
The 3.5 peak HP figure is a peak horsepower rating used for comparing wet/dry vacuums; it does not represent the motor's operational horsepower in use. A dolly carries the tools on board. Filtration uses a nanofiber cartridge filter, a foam sleeve and a 5-8 gallon high efficiency disposable filter bag.
It checks today's price at every store, compares the alternatives and answers in about a minute.


