Simagic TB-Neo Handbrake

Simagic TB-Neo

The Simagic TB-Neo is a modular sim racing handbrake built around a 100 kg pressure sensor and a 12-bit (4096-step) sensing circuit , on PC only . Its high-strength CNC aluminium alloy body accepts an upgrade path that the fixed-format handbrakes do not offer: vibration motors, hydraulic modules and replaceable rubber springs all bolt onto the same chassis. Travel, spring tension, linearity, force and dead zone are all adjustable, the lever converts between horizontal and vertical with five angle positions, and connection runs over USB-C to a PC or over CAN / CANFD to a Simagic wheelbase.

Main Features

Modular by design — one chassis, upgradeable with vibration motors, hydraulic modules and replaceable rubber springs

100 kg pressure sensor — standard configuration, 12-bit resolution over 4096 steps

Full-range adaptive sensing — quadruple cascaded amplification circuit for fidelity on small inputs without clipping on large ones

Dual-mode, five angles — horizontal or vertical mounting, lever angle and height adjustable

Fully tunable response — travel, spring tension, force, linearity and dead zone

Elastomer tuning — four hardness levels supplied, four documented tuning schemes

Multiple interfaces — USB-C to PC or base CAN, RJ45 to Alpha EVO CANFD

Haptic-ready — optional P-HPR / P-HPR NEO / P-HPR GT vibration module

Technical Specifications

Type: modular handbrake with pressure sensor

Model: TB-Neo

Pressure sensor: 100 kg (standard configuration)

Sensor resolution: 12-bit, 4096 steps

Adjustability: travel, spring tension, force, linearity, dead zone, 5 angle positions

Construction: aluminium alloy and ABS PC, POM handle

Connectivity: USB-C (PC or base CAN) or RJ45 (Alpha EVO CANFD)

Electrical parameters: DC 5 V / 1 A, 5 W max

Dimensions: 209.5 × 73.5 × 382.5 mm

Weight: 1363 g

Operating conditions: indoor use only, 0 °C to 40 °C, 20–80 % RH non-condensing

Platform: PC only (Windows)