This Shaker-style bifold door has a single-panel design on 1-3/8" pine. It suits a set of single panel closet doors. The panels are stacked in a traditional Shaker style.
The stiles (sides) and rails (horizontal portions) are engineered solid core pine. The inlaid portion of the Shaker panel is solid MDF. The solid stiles and rails leave some room for trimming, but the tolerance is minimal, and too much trimming may affect the door's integrity.
The surface is primed and needs light sanding before painting. Each unit includes an overhead track and hardware. The hinges come in a silver finish only.
- Style
- Shaker, single panel
- Thickness
- 1-3/8"
- Material
- Engineered solid core pine stiles and rails; solid MDF inlaid panel
- Finish
- Primed; light sanding needed before painting
- Hinge finish
- Silver only
- Actual size
- Slightly less than the stated size. A 24" W x 80" H door measures 11-13/16" W per panel by 79" H. A 24" W x 96" H door measures 11-13/16" W per panel by 95" H.
- Track
- Single units in 48", 60" and 72" widths share the same track
- Sizing
- Measure the finished opening side to side, then top to bottom, after Sheetrock is installed. A 60" W x 80" H opening takes two 30" W x 80" H bifold units.
- Trimming
- Minimal tolerance for trimming
- In the box
- Overhead track and hardware for each unit