Does the stand come with the saw?

Yes. The folding legs are integrated into the base, so the saw sets up and stores without a separate stand.

Can it cut a 4x4 in one pass?

Yes, at 90 degrees the saw handles 4x4 stock, and cutting depth at 90 degrees is about 2.5 inches.

Can I use a dado stack on it?

It accepts an 8-inch dado set, but you need a compatible throat plate and should check the arbor length.

It rips up to 25-1/2 inches to the right of the blade, which is wide for a jobsite saw.

Is it easy to move between jobs?

The folding legs help, but at 51 lbs it is best lifted by two people or with a cart.

What comes in the box?

The saw with folding stand, a 10-inch 24-tooth carbide blade, blade guard, push stick, miter gauge, anti-kickback pawls and dust port elbow.

What do buyers say about the SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding?

Rated 5 out of 5 from 1 ratings.

Where can I buy the SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding?

15 stores we checked sell it, including Walmart, Acme Tools, Ohio Power Tool, Stones Ace of, SKIL.

SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding

Q: Where is the SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding cheapest?

At Walmart, for $299.00, as of our latest check.

Best price now

$299.00at WalmartChecked 1 h ago

Compared across 15 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission. Price via Klarna.

Visit Walmart

What reviewers say

Owners treat this as a strong value jobsite saw for the money, praising the wide rip capacity, the smooth rack-and-pinion fence and the built-in folding stand. Common complaints center on weight, fence deflection when ripping wide stock, and the rough cut from the stock blade.

What people mention

FenceMixedOwners like how easily the rack-and-pinion fence adjusts and stays parallel, but some say it flexes on wide rips.
PortabilityMixedThe folding legs are praised for storage, yet the 51-lb weight makes carrying it a two-person job for some.
Cutting powerPraisedReviewers say the 15-amp motor rips hardwoods and 4x4 stock without bogging down.
Blade qualityCriticisedThe included 24-tooth carbide blade is called coarse, and many owners swap it for a finer blade.
Dust collectionCriticisedThe dust port elbow helps but leaves a lot of sawdust on the table and floor.
Table and buildMixedThe coated cast aluminum top is fine for the class, though some find it less flat than premium saws.

About the SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding

The SKIL TS6307-00 10" Jobsite Table Saw has a 25-1/2” (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup. This large coated cast aluminum tabletop saw comes equipped with a 10”, 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.