SkyRC HeatVision ITV500 Infrared Thermal Imager for RC Cars
Best price now
$60.00at RCJuiceChecked Nov 9
Compared across 10 stores. Prices are checked against each store and labelled with when.
Compared across 10 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The SkyRC HeatVision ITV500 is a pocket-size infrared thermal imager built for RC tuning and troubleshooting. It uses a 32 x 24 FIR sensor and a 1.83-inch capacitive touchscreen to show surface temperatures without contact, with automatic hot and cold spot marking. Adjustable emissivity from 0.01 to 1.00 and three palettes (White Hot, Ironbow, Rainbow) let you match readings to different materials. It weighs about 38g, charges over USB-C and reads -20°C to 300°C at ±2.0°C accuracy under proper conditions. Against phone-attached thermal cameras it trades resolution for a self-contained, pocketable tool; its 768-pixel sensor is coarse, so it is best for spotting hot spots on motors, ESCs, packs and tires rather than fine detail.
In stockShips from abroad · duties may apply
In stock
In stock
In stockSold by gonitrohobbies
In stockSold by Toys & Hobbies
In stock
In stockShips from abroad · duties may apply
Out of stockShips from abroad · duties may apply
Out of stock
Out of stock
Store links may earn us a commission.
Lowest price we've seen: $52.24 on Nov 10 at Alibaba.com; highest $60.00 on Nov 1. Tracked across 9 stores since Nov 1.
The SkyRC iTV500 Mini HeatVision is a pocket-size infrared thermal imager for RC tuning and troubleshooting. It shows surface temperature without contact, so you can check motors, engines, ESCs, battery packs, connectors, tires and other RC model surfaces during setup, testing or pit work.
It has a 32 x 24 FIR sensor and a 1.83" capacitive touchscreen. It marks hot and cold spots automatically. Three palettes are available: White Hot, Ironbow and Rainbow.
Emissivity is adjustable from 0.01 to 1.00 to match different materials. The imager measures from -20°C to 300°C with ±2.0°C accuracy under proper conditions. For high accuracy, stay within 20 cm of the target and treat low-emissivity surfaces like bare metal as recommended. It is rechargeable over USB-C.