Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The SLD09 is a 16.4 ft COB LED tape light that combines RGB color changing with tunable white from 2800K to 6500K. Its chip-on-board construction gives a continuous, dotless line of light with no hot spots, unlike standard diode strips where individual LEDs are visible. It runs on 24V DC at 4.5W per foot and is IP20 rated, so it suits dry indoor installations such as under cabinets, coves and shelves. It is a bare tape light, so a 24V driver and a suitable RGB CCT controller are needed to run it.
In stockReturn policy
This is a dotless linear COB LED strip that changes colors (RGB) and tunes white light. It uses FCOB technology to give seamless light with no hot spots or dead spots. Traditional strips space out their LED diodes, which makes visible bright points. This strip gives consistent light along its whole length.
The strip is 16.4 ft (5 m) long and 12 mm wide, so it fits most standard aluminum channels. It can be cut every 1.4 in. to the length you need. It runs on 24V DC low voltage and needs a 24V RGBCW controller and a 24V DC power supply (transformer). Compatible controllers let you adjust colors and white tone.
It can be used in kitchen cabinets, closets, along edges and stairs, on balconies, and for party or wedding decoration. Unroll and test the strip before installing it to confirm it works.
