StoreDeal.ai store
Shop
  • Deals
  • Deal checker
  • Black Friday
  • Buying guides
  • Brands
  • Stores
Travel
  • Flight deals
  • Hotel deals
Company
  • Research
  • Press
  • Use in AI assistants
  • Contact
  • deal.ai apps
Black Friday 2026
  • Walmart
  • Best Buy
  • Target
  • TVs
  • Laptops
  • Headphones
  • Apple
  • Gaming
  • Vacuums
  • Kitchen
  • Toys
  • Smartwatches
  • Tablets
  • Furniture
  • Mattresses
© Deal.ai Inc.·2222 Ponce de Leon Blvd, Miami, FL 33134·support@deal.ai
TermsPrivacy
Deal.ai
S
Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried

Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried

Best price now

$21.26at EtsyChecked Nov 13

Prices are checked against each store and labelled with when.

Visit Etsy

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Enter to send, Shift+Enter for a new line

Price facts

  • Last seen at $21.26 at Etsy on Nov 13.

Our take on the Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried

A single kiln-dried smoked oak board, 52 mm thick and trimmed on the long edges with no bark edge. The thickness suits table legs, shelf blanks, knife blocks and turning work more than thin panel projects. Smoked oak gives oak's grain a dark brown tone, and color varies from board to board and within one board. Compared with plain kiln-dried oak, it saves you the fuming or staining step but gives you less control over the final shade.

Best forFurniture makers building legs, frames and thick topsWoodturners needing solid 52 mm blanksDIY builders wanting pre-trimmed, dimensioned oakSmall shops without a planer or bandsaw mill
Pros
  • 52 mm raw thickness gives room to resaw or turn
  • Long edges trimmed straight, no bark to remove
  • Kiln-dried to roughly 8–10% moisture, ready for indoor work
  • Cut to the width and length you order
  • Smoked color runs through the wood, not just on the surface
Cons
  • Color and grain vary between boards and within one board
  • Raw sawn faces need planing and sanding before finish
  • Thick stock takes longer to dry out after cutting
  • Small dimensional tolerances shift as moisture changes
  • Narrow widths top out at 16 cm, so wide panels need glue-ups

Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried prices at every store

  • EtsyNew

    In stockSold by Seller

    $21.26Checked Nov 13
    Visit Etsy

Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried price history

Lowest price we've seen: $21.26 on Nov 13 at Etsy. Tracked across 1 store since Nov 13.

From Etsy

  • Smoked oak solid wood with dark brown tones and distinctive grain
  • 52 mm raw thickness for furniture parts, table legs, shelves, knife blocks, turning blanks and DIY
  • Trimmed boards with straight long edges, no bark edge
  • Kiln-dried to approx. 8–10% wood moisture
  • FAS quality, one of the highest wood grades on the market
  • Cut to the offered dimensions in the seller's Sauerland workshop
Sizes
Widths: 10, 11, 12, 13, , Lengths: 40, 60, 80, 100
Materials
Wood type: Oak (smoked oak)
Fit
Raw thickness of 52 mm is not a guaranteed finished thickness; allow extra material for jointing, planing, sanding and final trimming. Width tolerance ±0.3 mm,
Sizing
Hue and color intensity can vary within a single board and between pieces; FAS quality does not mean every piece is knot-free or uniformly colored.
Care
Allow the wood to acclimatize to the future room climate before final processing; a suitable surface treatment such as oil highlights the grain and can deepen t
Returns
Returns and exchanges accepted within 14 days; buyer pays return shipping and is responsible for loss of value if not returned in original condition; custom or
Shipping
Ships from Germany; order today for estimated delivery Nov 25–Dec 7; international shipping available with costs shown at checkout.
In the box
Boards cut to the selected dimensions, trimmed without bark edge

About the Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried

These solid boards are smoked oak with dark brown tones and a distinctive grain. They are trimmed to straight long edges, with no bark edge, and cut to the offered dimensions for further processing. The raw thickness is 52 mm.

The wood is kiln-dried to a moisture content of about 8–10%. Even kiln-dried wood absorbs and releases moisture, so let it acclimatize to the room climate before final processing. Trimmed does not mean planed or sanded. The 52 mm is a raw thickness, not a guaranteed finished thickness, so allow extra material for jointing, planing, sanding and final trimming.

Hue and color intensity can vary within a board and between pieces. FAS quality does not mean every piece is knot-free or uniformly colored. An oil finish highlights the grain and can deepen the color. Depending on size and processing, the boards suit furniture parts, table legs, shelves, knife blocks, turning blanks and DIY projects.

Wood type
Smoked oak, solid wood
Grade
FAS, A/B quality
Finish
Trimmed, no bark edge, straight long edges
Thickness
52 mm raw thickness
Widths
10, 11, 12, 13, 14, 15 or 16 cm
Lengths
40, 60, 80, 100, 120 or 150 cm
Drying
Technically kiln-dried
Moisture content
Approx. 8–10%
Width tolerance
±0.3 mm at the time of cutting
Length tolerance
±0.5 cm at the time of cutting
Surface
Not planed or sanded
Care
Acclimatize to the room climate before final processing; oil highlights the grain and can deepen the color
Uses
Furniture parts, table legs, table and bench tops from glued boards, shelves, brackets, knife blocks, lamp bases, turning blanks, milling work, DIY
In the box
Boards cut to the selected dimensions, trimmed without bark edge

Questions and answers

Is this board ready to use out of the box?
It is kiln-dried to about 8–10% moisture and trimmed on the long edges, but the faces are raw. Expect to plane, sand and finish it before it becomes furniture.
What does FAS quality mean here?
FAS is one of the top hardwood grades, meaning boards are largely clear of defects on their best face. Smoked oak still shows natural color variation and grain, so expect character rather than a uniform look.
Can I cut it down for table legs or turning blanks?
Yes. At 52 mm raw thickness it suits legs, shelf blanks, knife blocks and lathe work. Leave extra allowance, since cutting exposes fresh wood that can move slightly as it adjusts.
How stable is the thickness and length?
Cut dimensions are held to about ±0.3 mm in width and ±0.5 cm in length at the time of processing. Later moisture changes can shift dimensions slightly, so acclimate the board before final machining.
Does the smoke treatment go all the way through?
Smoking darkens the wood itself rather than coating it, so the tone holds when you cut or sand. Color intensity still varies between boards and across a single board.
What finish works on smoked oak?
An oil finish brings out the grain and can deepen the dark brown tone. Test on an offcut first, since smoked oak varies in how much finish it absorbs.
Where is the Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried cheapest?
At Etsy, for $21.26, as of our latest check.

Stores we've priced the Smoked Oak Solid Wood 52 mm Edged FAS Quality Kiln-Dried at

  • Etsy deals and prices

More hardwood boards

  • S
    S4S Walnut Board
    S4S Walnut Board
  • P
    Poplar Tongue and Groove Hardwood Board
    Poplar Tongue and Groove Hardwood Board
  • W
    Walnut Wood Panels - 3/4" Solid Hardwood Boards for Shelves, Signs & DIY Projects
    Walnut Wood Panels - 3/4" Solid Hardwood Boards for Shelves, Signs & DIY Projects
  • W
    White Oak Wood Panels - 3/4" Solid Hardwood Boards for Shelves, Signs & DIY Projects
White Oak Wood Panels - 3/4" Solid Hardwood Boards for Shelves, Signs & DIY Projects
  • M
    Maple Wood Panels - 1.75" Solid Hardwood Boards for Shelves, Signs & DIY Projects
    Maple Wood Panels - 1.75" Solid Hardwood Boards for Shelves, Signs & DIY Projects
  • W
    Walnut Wood Panels - 1.75" Solid Hardwood Boards for Shelves, Signs & DIY Projects
    Walnut Wood Panels - 1.75" Solid Hardwood Boards for Shelves, Signs & DIY Projects
  • A
    Ambrosia Maple Wood Panels - 3/4" Solid Hardwood Boards for Shelves, Signs & DIY Projects
    Ambrosia Maple Wood Panels - 3/4" Solid Hardwood Boards for Shelves, Signs & DIY Projects
  • C
    Cherry Wood Panels 3/4" Solid Hardwood Boards
    Cherry Wood Panels 3/4" Solid Hardwood Boards